Moustache® 3D Doodle Printing Pen with LED Screen creates 3D art and objects with ultimate ease and precision. Moustache® 3D Pen replaces ink with PLA material melts at a high temperature which is used to draw in the air or on a surface to create 3D objects. Melted Plastic cools down very fast which makes the whole process safe. It is a high-performance 3D printing pen with a compact design that makes it perfect for beginners in 3D printing.
Moustache® 3D Printing Pen Brings Superior Performances
Easy to use. Simply plug-in, heat up and extrude to create your art.(refer to the following for more operation guide)
Advanced LED Screen clearly display the corresponding speed: Low/Medium/High speed. You can choose the appropriate mode according to painting proficiency.
Safe for Kids.When melting, PLA is non-toxic, odorless. It won't cause burning injury because the filament is heated through the pen body and cooled much down at 70-80 degree celsius before it comes out of the nozzle.
Ergonomic Finished. The diameter of handheld part of 3D print pen is 31.5-46 mm. Only if it feels good, you can create perfect masterpiece, use print pen comfortably.
Selected mode of PLA or ABS. It is both compatible with PLA or ABS filament. You can choose the way you like according to your need.
Adjustable Speed.You can freely adjust the extrusion speed depending on your need just by simply pushing the speed controller.
Highly-customized.We offer 3D Printing Pen Combo with 15 colors of PLA filaments for buying. (12 Normal Various Colors and 3 Glow Colors in 33 ft each). Compared to ABS, the PLA filament is more eco-friendly and safer.
LED Working Indicator. There are two led indicating lights to clearly notify you the working condition so that you are informed whether it works.
Non-Clogging.It features an unclogging mechanisms to prevent jamming,which is available for using a longer time.
Simple Operation Guide
1)Power the 3D printing pen. Yellow LED light indicates standby mode.
2)The LED screen will display “PLA” or “ABS”, choose the right material mode
3)Keep pressing the Load Filament Button, Red LED light on means the pen is in preheating mode.
4)When the Red indicator turns green, the pen is ready to work.
5)Insert the filament into the ‘Filament import hole’, press and hold the ‘Load Filament Button’.
6)Keep clicking the Load Filament Button until the material flows out from the nozzle.
7)Cover stencils with PVC drawing board,start creating.
All brand names and trademarks are the property of their respective owners and are referred to here for descriptive purposes only. We are not associated with any of these manufacturers. The replacement cartridges contain new and recycled components.